Yes, the title is correct. One of NVIDIA's GeForce RTX 5090D "China" edition GPUs, not the regular RTX 5090, managed to run at 3.4 GHz under liquid nitrogen. With a staggering 575 W default TDP, Tony Yu, ASUS China's general manager, has performed physical modifications that allow the card to run up to 1000 W TDP. The RTX 5090D is a China-exclusive variant with virtually no difference from the regular RTX 5090, just limited general AI capability due to US export regulations. ASUS China used its top-end Astral OC variant for this stunt, which, as we proved in our review of the regular ASUS RTX 5090 Astral OC , has some pretty good chip binning, allowing the card to reach the highest overclock. We pushed the regular RTX 5090 Astral OC GPU on air to 3086 MHz, a +277 MHz over the stock boost setting. However, the RTX 5090D equivalent under LN2 manages to reach 3,390 MHz at peak loads, which is a +581 MHz difference.

For memory, the overclock is equally impressive with 34 Gbps. Regarding performance, the LN2-overclocked RTX 5090D surpassed stock performance by approximately 16%. During benchmark tests, the GPU outperformed multiple previous-generation graphics cards, including a dual RTX 3090 Ti configuration in Port Royal and a quad GTX 1080 Ti setup in Fire Strike. Power consumption figures indicate that 1,760 W was used in total for a rig with ASUS ROG Astral RTX 5090D, which is paired with the Ryzen 7 9800X3D on the ASUS ROG X870E Hero motherboard. This roughly yields a 1,000 W power consumption by the card, which has seen its PCB get physical modifications to output such high power.