Yeston adds new Game Ace cards to its lineup
RTX 5060 series based.
Yeston has introduced two new models to its RTX 50 series lineup, the RTX 5060 Ti 16GB D7 Game Ace and RTX 5060 8GB D7 Game Ace. Both cards share a similar triple-fan design and use GDDR7 memory but differ in performance, configuration, and power design.
The RTX 5060 Ti Game Ace is based on the GB206 GPU with 4608 CUDA cores, paired with 16GB of GDDR7 memory on a 128-bit bus running at 28 Gbps. The card features a boost clock of up to 2662 MHz. Cooling is handled by a nickel-plated copper base, four 6 mm composite heat pipes, and three 8.7 cm dual ball-bearing fans. The board uses a 5+2 phase VRM and draws power through a single 8-pin connector. Yeston recommends a 600W PSU.
RTX 5060 Ti 16GB Game Ace, Source: Yeston
The RTX 5060 Game Ace also uses the GB206 core but comes with 3840 CUDA cores and 8GB of GDDR7 memory. It reaches a maximum clock of 2580 MHz. This model adopts a slightly weaker 4+2 power phase design and consumes around 155W, with Yeston suggesting at least a 550W ATX power supply.
RTX 5060 8GB Game Ace, Source: Yeston
Both cards include three DisplayPort 2.1b and one HDMI 2.1b output, support PCIe 5.0 x8, and feature adjustable-speed fans with ARGB lighting. Yeston says the default lighting uses a single-color gradient breathing effect that can be synchronized with the system’s ARGB setup, though it cannot be turned off.
As far as we know, Yeston RTX 5060 series is not officially on sale outside China. Perhaps Yeston will change course, but it’s more about NVIDIA restrictions than what Yeston wants.
| YESTON RTX 5060 Ti Game Ace | ||
|---|---|---|
| VideoCardz.com | RTX 5060 Ti 16G D7 Game Master ACE | RTX 5060 8G D7 Game Master |
| GPU | GB206 | GB206 |
| CUDA Cores | 4608 | 3840 |
| Core Clock | 2407–2662 MHz | 2280–2580 MHz |
| Memory | 16 GB / 128-bit / GDDR7 | 8 GB / 128-bit / GDDR7 |
| Memory Speed | 28 Gbps | 28 Gbps |
| Memory Frequency | 1750 MHz | 1750 MHz |
| Tensor Core (AI) | 759 AI TOPS | 421 AI TOPS |
| Bus Interface | PCI-Express 5.0 ×8 | PCI-Express 5.0 ×8 |
| Output Interfaces | 3 × DP 2.1b, 1 × HDMI 2.1b | 3 × DP 2.1b, 1 × HDMI 2.1b |
| Power Connector | 8-pin × 1 | 8-pin × 1 |
| Power Design | 5 + 2 phase | 4 × NVVDD + 2 × FBVDD |
| Typical Board Power | — | ≈ 155 W |
| Recommended PSU | ≥ 600 W | ≥ 550 W (ATX 3.0) |
| Cooler Design | 4 × 6 mm heat pipes, 3 × 8.7 cm fans, nickel-plated copper base | 2 × 6 mm heat pipes, 3 × 8.7 cm fans |
| Fan Connector / Control | 6-pin, speed display + adjustable | — |
| Lighting | ARGB, single-color gradient breathing, sync supported / cannot turn off | ARGB, sync supported |
| Dimensions | 306 × 126 × 53 mm / 318 × 141 × 53 mm | 300 × 132 × 54 mm / 311 × 147 × 54 mm |
| Weight | 1005 g | 915 g |
Source: Yeston